Skip to content
Southwest Fabrication
Caddo Mills, TexasQuality Custom Craftsmanship7am–3pm Central, Mon–Fri469-688-6985

Shop

4L60E / 4L65E / 4L70E Tail Housing Kit

Mechanical speedometer drive and factory shifter location for the 4L60E family.

$850.00

Machined tail housing that gives a 4L60E, 4L65E or 4L70E a factory mechanical speedometer take-off while keeping the shifter where the original transmission put it. VSS capability is retained, so nothing in the stock harness has to be cut or fooled.

This one is cut to your numbers. Run the speedometer gear calculator first, then bring the tooth count to checkout. Between sizes, or an odd rear gear, call 469-688-6985 and we will cut it to suit.

Transmission4L60E / 4L65E / 4L70E
SpeedometerMechanical cable, factory gauge
VSSRetained
Reluctor / drive gear40T reluctor wheel with 15T speedometer drive gear
GearsCut to your calculated tooth count
Lead time2–3 weeks

From the tech notes

Related parts

Questions people ask

What does the 4L60E tail housing kit fit?

It fits the 4L60E, 4L65E, and 4L70E. It gives those transmissions a factory mechanical speedometer take-off and keeps the shifter where the original transmission put it.

Does the vehicle speed sensor still work?

Yes. VSS capability is retained, so nothing in the stock harness has to be cut or fooled.

What is the lead time on the 4L60E tail housing kit?

The product listing says 2–3 weeks. The shipping policy also says housings are made to order and currently leave the shop in 7 to 10 business days. Call 469-688-6985 if you need a date for a specific order.

How are the speedometer gears chosen?

Gears are cut to the tooth count from your tire diameter and rear gear ratio. Use the speedometer gear calculator, or call the shop and we will walk the numbers with you.

Cast and machined 4L60E tail housing
Southwest Fabrication4540 FM1565, Caddo Mills, TX 75135469-688-6985[email protected]Mon–Fri, 7am–3pm Central